DIJ INDIA single stage single gauge regulator is a compact regulator which delivers consistently peak performance even in tough working conditions. Sturdy construction of this regulator ensures efficient and dependable control of gas. Inlet pressure gauge will give you readings about cylinder pressure at the same time you can set desired working pressure easily.

• DIJ INDIA Single Stage Regulators suitable for 300 bar inlet pressure and safety pressure gauge for 400 bar pressure. Confirming to "ISO 5171" standards
• Long life
• Outlet pressure stability
• Steady flow of gases
• Fire-Protect valve material
• Neoprene diaphragm.
• Which withstand stock of full cylinder pressure.
• Gives flexibility & better pressure regulation
• Pressure reduction from manifold or cylinder
• Forged brass body & cap
• Safety valve
• Inlet filter

• Regulator manufactured from high strength extrusion rod as per "IS 319" materials tested by "NABL approved laboratory" as per "ISO 9539".
• S.S. Valve pin.
• All spares. body & bonnet of regulator are machining in "C N C".
• All rubber parts made from neoprene "rubber tested by NABL approved laboratory" as per "ISO 9539".
• Valve made of fire retardant brass.
• High strength bull nose nipple.
• DIJ INDIA oxygen regulator "outlet flow is 1000 Lpm". in case of system failure, same flow can be passing through safety valve to "avoid an accident".
• Inlet filters "stops harmful particles" to protect the internal system of regulator.
• Body- bonnet is tested & passed "shearing test" in 500 bar hydraulic pressure.
• Our oxygen regulator is passed "ignition test" with high pressure oxygen gas flow of "120°C", there is "no burning observed".
• All DIJ INDIA regulators tested & passed "heat test", all are working properly at "60°C".
• All DIJ INDIA regulators tested & passed "freezing test", all are working properly at " -20°C".